starQuiz2ResultsFile Industrial Applications Credit 8 :
250 +361 6 7 d*CHOOSE YOUR TEACHER FROM THE OPTIONS BELOW @E CHOOSE YOUR TEACHER FROM THE OPTIONS BELOW @q k l Mr McGivern mMr Carey n Mrs Smith oMr Munro 0 @ 183857 dA company is thinking of introducing robot arms to parts of its factory.
Explain why a systems analysis needs to be carried out before the robot arms are introduced. [KU] @e A company is thinking of introducing robot arms to parts of its factory.
Explain why a systems analysis needs to be carried out before the robot arms are introduced. [KU] @ k 2000 @ 183858 dmOutline three things that the systems analysts will consider in the development of the automated system. [KU] @[@ Outline three things that the systems analysts will consider in the development of the automated system. [KU] @ k 3000 @ 183859 dEach robot arm has an analogue pressure sensor fitted. Why is it necessary for the computer that controls the robots to have an analogue to digital converter? [KU] @d Each robot arm has an analogue pressure sensor fitted. Why is it necessary for the computer that controls the robots to have an analogue to digital converter? [KU] @ k 1000 @ 183860 dSome of the staff are unhappy at the possible introduction of robots into the factory.
Give one reason why staff may be unhappy. [PS] @` Some of the staff are unhappy at the possible introduction of robots into the factory.
Give one reason why staff may be unhappy. [PS] @ k 1000 @ 183861 dSuggest one thing that the management could tell the staff to show them that they have no need to be unhappy about the proposals. [PS] @` Suggest one thing that the management could tell the staff to show them that they have no need to be unhappy about the proposals. [PS] @ k 1000 @ 183862 dThe company find out that the programs which run the robots have been written using a special purpose control language.
Give two reasons why a programmer would use a control language for this purpose. [KU] @i The company find out that the programs which run the robots have been written using a special purpose control language.
Give two reasons why a programmer would use a control language for this purpose. [KU] @ k 2000 @ 183863 dvThe control software for a robot can be held either on disc or in ROM.
Give one advantage of disc-based software. [KU] @] The control software for a robot can be held either on disc or in ROM.
Give one advantage of disc-based software. [KU] @0 k 1000 @ 183864 d.Give one advantage of ROM-based software. [KU] @G Give one advantage of ROM-based software. [KU] @ k 1000 @ 183865 2 3 4 @ 10065 ! ) @ 14974